iicsetw - is it somewhere on the AltEPG ISO?

General Discussion

iicsetw - is it somewhere on the AltEPG ISO?

Postby angusr » Sat Jun 25, 2011 5:01 pm

Finally got round to slapping in a new HDD with AtlEPG, all seems to going basically okay (just activating Mode 0 as I type - only when it's not there did I realise how much of a difference it made!)

One thing though is the old problem with the SCART output levels being a bit off. I had an iicsetw line (I'm sure it was the "recommended" one at the time I set it up!) in the sysinit, but it's all on the old disk...

Is there a copy of iicsetw somewhere on the image already? If so, what's the most likely tweak line to add?

Cheers,
Angus
angusr
Almost there...
Almost there...
 
Posts: 15
Joined: Thu May 19, 2011 1:45 pm

Re: iicsetw - is it somewhere on the AltEPG ISO?

Postby tivofantastic » Sat Jun 25, 2011 6:16 pm

I have the following in rc.sysinit.author
Code: Select all
/var/hack/scripts/setrgb.sh &


setrgb.sh contains:
Code: Select all
#!/bin/bash

echo "setrgb.sh: adjust RGB input 38=luminance"
/var/hack/bin/iicsetw 0x8Ch 0x38h 20
sleep 5
echo "setrgb.sh: adjust RGB input 39=colour"
/var/hack/bin/iicsetw 0x8Ch 0x39h 21
echo "setrgb.sh: Finished"


I can't remember the whys and wherefores but I think the sleep 5 is there for a reason - i.e. can crash without it.
Attachments
iicsetw.zip
(8.13 KiB) Downloaded 170 times
tivofantastic
Almost there...
Almost there...
 
Posts: 47
Joined: Thu Mar 24, 2011 11:00 am

Re: iicsetw - is it somewhere on the AltEPG ISO?

Postby angusr » Sat Jun 25, 2011 8:16 pm

Cheers, I'll have a fiddle. Noticed that I also now have a green stripe down the right hand side with mode 0 on, so there's that to correct as well... wish I could find the original posting I got the settings from a few years back because I just copied them and they were fine!
angusr
Almost there...
Almost there...
 
Posts: 15
Joined: Thu May 19, 2011 1:45 pm

Re: iicsetw - is it somewhere on the AltEPG ISO?

Postby nick1austin » Sat Jun 25, 2011 8:29 pm

angusr wrote:Cheers, I'll have a fiddle. Noticed that I also now have a green stripe down the right hand side with mode 0 on, so there's that to correct as well...

The modified fpga file will fix that:
http://www.ljay.org.uk/tivoweb/tivo_fpga.html
Last edited by nick1austin on Mon Aug 29, 2011 5:33 am, edited 2 times in total.
nick1austin
TiVo lover
TiVo lover
 
Posts: 217
Joined: Wed Feb 16, 2011 7:03 pm
Location: Weston-super-Mare

Re: iicsetw - is it somewhere on the AltEPG ISO?

Postby angusr » Sat Jun 25, 2011 9:41 pm

nick1austin wrote:
angusr wrote:Cheers, I'll have a fiddle. Noticed that I also now have a green stripe down the right hand side with mode 0 on, so there's that to correct as well...

The modified fpga file will fix that:
http://www.ljay.org.uk/tivoweb/tivo_fpga.html


Hmm, I assumed that the mode 0 setup on the image would do that bit for me - there appears to be a script to do it ( /var/hack/setup/fpga). Presumably the kickstart thing can't do everything. Time to give it a go...

Ta!

Angus
angusr
Almost there...
Almost there...
 
Posts: 15
Joined: Thu May 19, 2011 1:45 pm


Return to General

Who is online

Users browsing this forum: No registered users and 22 guests